Ukugcinwa kwedayimani kunye ne-carbide yabona iibhloko

Iiblue zedayimani

I-1. Ukuba idayimane yedayimane ayisetyenziswanga ngokukhawuleza, kufuneka ibekwe iflethi okanye ixhonywe ngokusebenzisa umngxunya ongaphakathi, kwaye idayimane yedayimani ayinakukwazi ukuhlawulelwa ubume bomswakama-buninzi kwaye Ubungqina.

2. Xa idayimane yabona i-diamode ingasabukhali kwaye umphezulu osikiweyo rhabaxa, kufuneka ususwe kwitafile ethengiweyo ngexesha kwaye uthunyelwe kwidayimani yedayimane ukuze iphinde ilungiswe kwakhona 4 ukuya kumaxesha ama-8, kwaye olona ntungo lude kakhulu luphakame iiyure ezingama-4000 okanye ngaphezulu). Idayimane yabona i-Blade sisixhobo esihamba ngesantya esiphezulu sokusika, iimfuno zayo zokulinganisa i-Dynamic iphezulu, nceda ungaphathi idayimane ibe dade i-Bladen, i-Grinding ayinakutshintsha i-angle yoqobo kwaye itshabalalise ibhalansi yentsusa.

3. Ukulungiswa komgca ongaphakathi wedayimani wabona iklaba kunye nokulungiswa komngxunya wokubeka kufuneka kwenziwe ngumzi-mveliso. Ukuba ukulungiswa akulunganga, kuya kuchaphazela isiphumo sokusetyenziswa kwemveliso, kwaye kusenokubakho iingozi, kwaye i-reaint ayifanele idlule ngaphezulu kwe-20mm ngokomgaqo, ukuze ingachaphazeli ibhalansi yoxinzelelo.

Blide Blades

1. I-carbide engasetyenziswanga i-carbide yabona iibhloko zebhokisi kufuneka ibekwe kwibhokisi yokupakisha ukuze igcine ii-blades ezikhoyo ngokubanzi kumzi-mveliso ziya kuba nonyango olubanzi lwe-anti-rust kuya kuvulwa.

2. Kwi-Blades esetyenzisiweyo esetyenzisiweyo ekufuneka ibuyiselwe kwibhokisi yokupakishwa ye-YUAAN emva kokususwa, nokuba ithunyelwe kumvelisi wokuGcina okanye igcinwe kwindawo ekusetyenzwa kuyo, kufuneka ikhethwe ngokuthe nkqo, kwaye kwi Ixesha elifanayo, ingqalelo kufuneka ihlawulwe ukunqanda ukuyibeka kwigumbi elinqabileyo.

3. Ukuba ifakwe iflethi, zama ukuphepha ukukhulula okukhulu, ukuze kungabi nakubangela uxinzelelo lwexesha elide ukubangela i-blade ye-Blad ukuya kwi-Blad, kungenjalo iya kubangela I-sawtooth okanye ukukrala i-sawtooth kunye neplate yesayizi, kukhokelela ekonakaleni kwamazinyo e-carbide kunye nokuqhekezwa.

4. Kuba zabona amabala angenalo unyango olukhethekileyo oluchasene nombane kwi-ansip, nceda usule ioyile ye-anti-rust ngexesha lokusebenzisa i-blade ye-rusting ngenxa yokungasebenzi kwexesha elide.

5. Xa i-saw blade ayiyobukhali, okanye isiphumo esisikiweyo asilungile, kunyanzelekile ukuba siyigibise i-Serizoy, kwaye kulula ukutshabalalisa amazinyo okuqala, kwaye nciphisa ubomi benkonzo ye-Blade.