Ukusesha kusengaphambili

Umkhiqizo ofakiwe

I-Hero v6 saw saw blade Industrial saw bladeworder amathuluzi

Xhumana nathi Funda kabanzi
Umkhiqizo ofakiwe

I-PCD yabona iBlade for Panel Sing saw blade

Xhumana nathi Funda kabanzi
Umkhiqizo ofakiwe

Amakhaza atholwe i-farrous yensimbi

Xhumana nathi Funda kabanzi
Umkhiqizo ofakiwe

I-TCT Dowel Dring Bits Brad-Point Drill Bits

Xhumana nathi Funda kabanzi
Umkhiqizo ofakiwe

I-Hero TCT ROUter Right Bits

Xhumana nathi Funda kabanzi
Umkhiqizo ofakiwe

I-PCD Fine Trimming Cutter yomshini wokufaka ama-banding machin Wood Edging

Xhumana nathi Funda kabanzi
Umkhiqizo ofakiwe

Amanye amathuluzi

Xhumana nathi Funda kabanzi

I-Dry Cut Saw Machine CRD1 isithombe esifakiwe

Cry cut saw saw umshini we-CRD1

Incazelo emfushane:

I-Dry Cut saw Machine Card1 eyenziwe nge-PREPP COPPER Motor emsulwa, kanye nemvamisa yayo ehleliwe nge-1300rpm. Faka isicelo sokusika ibha yensimbi, insimbi yepayipi yensimbi nezinye izinto ezinobunzima.

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Amathegi Omkhiqizo

Isingeniso Somkhiqizo

Izici

1. Inqubo yokusika ehlanzekile eco-enobungane - uthuli oluphansi ekusikeni.
2. Ukusika okuphephile - gwema ngempumelelo ukuqhekeka nokuhlehla.
3. Ukusika okusheshayo - 4.3s ukusika ibha yensimbi engu-32mm deformed.
4. Indawo ebushelelezi: indawo yokusika eyisicaba enemininingwane eqondile yokusika.
I-5. Okungabizi kakhulu: Ukuqina okuthuthukile ngezindleko zokunciphisa iyunithi yokuncintisana.

Amapharamitha

Isifanekiso	I-CRD1-255	I-CRD1-355
Ubuqhwaga	2600w	2600w
Max.saw blale ubukhulu	255mm	I-355mm
I-RPM	I-1300r / Min	I-1300r / Min
Bhoboza	25.4mm
Amandla kagesi	220v / 50hz

Umthandi

1. Q: Ingabe umenzi we-herototools?
A: Ama-Herotools akhiqizi futhi asungulwe ngonyaka we-1999, sinabathengisi abangaphezu kuka-200 emhlabeni wonke futhi iningi lamakhasimende ethu avela eNyakatho Melika, eSoutheast Asia kanye nabalingani bethu be-East Asia njll. Abalingani bethu bamazwe omhlaba bafaka u-Israyeli Dimar , IJalimane Leco neTaiwan Arden.Hope singanikeza imikhiqizo esezingeni eliphezulu nensizakalo enhle yokuthengisa.

2. Q: Yini isikhathi sokulethwa?
A: Imvamisa sinomshini futhi sabona i-blade esitokweni, sidinga kuphela izinsuku ezingama-3-5 ukulungiselela iphakheji, uma unganasitoko, sidinga izinsuku ezingama-20 ukukhiqiza umshini futhi sabona ibala.

3. Q: Uyini umehluko phakathi kwe-CRD1 ne-ARD1?
A: I-CRD1 imvamisa engaguquki nge-1300rpm, futhi i-ard1 iguqulwa imvamisa nge-700-1300rpm, uma usika izinto eziwugqinsi, ngoba ijubane lokusika lingu-700-1300rpm, futhi udinga i-700rpm ukusika izinto eziwugqinsi. Futhi udinga I-Blade Working Life izoba yinde.

4. Q: Ungawukhetha kanjani umshini wokuguqula imvamisa nomshini wemvamisa olungiselelwe?
A: Ukuguqulwa imvamisa kusho ukuthi ijubane liyakwazi ukuguqulwa, ijubane lomshini wethu wokuguqula imvamisa lisuka ku-700rpm liye ku-1300rpm liye ku-1300rpm, ungakhetha ijubane elifanele ukusika izinto zokwehlukanisa.
Imvamisa elungisiwe kusho ukuthi ijubane lihleliwe, ijubane lomshini wemvamisa olungiselelwe yi-1300rpm.

Empeleni imishini yemvamisa enqunyelwe (1300rpm) yanele ukuba amakhasimende amaningi (ama-80%), kepha amanye amakhasimende adinga ukusika izinto ezinkulu kakhulu, njenge-50mm eyindilinga yensimbi, njengensimbi enkulu kakhulu yensimbi yensimbi ne-u-shape, kanjalo Kulesi simo, ikhasimende lidinga ukukhetha umshini wokuguqula imvamisa, bese ulungisa ijubane ku-700rpm noma nge-900rpm.