News - A Little Bit of Knowledge About Using A Cold Saw! Let You Win at the Starting Line!

A Little Bit of Knowledge About Using A Cold Saw! Let You Win at the Starting Line!

In this article, we will tell you some knowledge and tips about using cold saws ~ only to bring the best experience and quality of use!

First of all, customers who use cold-cutting saws must pay attention to the following issues.This operation can prevent the saw blade chipped teeth, so that the saw blade more durable.
Start the machine do not immediately cut down, wait for the saw blade to reach a certain speed before going down the material.Do not cut the saw teeth after touching broken, repair and repair the teeth before use.The workpiece must be clamped to prevent the workpiece from shaking during the cutting process and thus hitting the teeth.
Ordinary cold cutting saw blade do not cut stainless steel, choose a special stainless steel cold cutting saw blade.
The last point is very important! The saw teeth must be perpendicular to the workpiece when the knife.The biggest advantage of cold sawing is that compared to the traditional use of abrasive blades, the cost is 80% less and the efficiency is six times higher. It is safer to use and saves labor.

And we also have different cold saw machines adapted for different cutting materials and applications. For example, machines such as ARD1 and CARD1.

And at the same time, our welded teeth equipment are fully automatic welding machine, efficiency and accuracy are very high. Infrared strictly control the qualified alloy saw teeth, so that one by one to weld the alloy on. Only for each alloy responsible, such a saw blade is worthy of your trust.
Ordinary dry cutting metal cold saw, the blade is a cermet this saw blade can not cut stainless steel, so there is no one can cut stainless steel dry cutting metal cold saw it? Of course there is. Cut stainless steel dry cutting metal cold saw blade needs to use a special alloy, the angle and number of teeth are different from the ordinary, such as the number of teeth to be a little more dense. And, the machine's speed should be a little lower.
At the same time, when cutting stainless steel cold saw speed needs to be adjusted to 700.Cold cutting saw cutting stainless steel, need special stainless steel cold saw.The tooth type and ordinary cold saw has some differences. But the same are non-sparking, efficient.
Some people will also ask how to choose a cold saw with different wall thicknesses. Wall thickness of less than 2 mm saw tube can not be cut, can be cut.
If the wall thickness of the saw tube is less than 2mm, it is recommended to use the cold saw with more feet.If the wall thickness of the saw tube is greater than 2mm, it is recommended to use the number of teeth less cold saw.Cutting volume per tooth, a simple understanding is that each tooth in the saw blade its cutting depth.
We use the feed speed divided by the number of revolutions of the spindle, and then divided by the number of teeth of the saw blade, you can get the cutting volume per tooth.You can look at the section of the round steel, can clearly see the cutting marks of each tooth.
The spacing of each cutting trace is the cutting volume of each tooth.For example, the thread just cut with our cold saw (one tooth) can cut about one wire depth.

Post time: Feb-09-2023