How to Use Carbide Blades Wisely

First of all, when using carbide saw blades, we must choose the right saw blade according to the design requirements of the equipment, and we must first confirm the performance and use of the machine, and it is best to read the instructions of the machine first. So as not to cause accidents due to misfitting.

When using saw blades, you should first confirm that the speed of the spindle of the machine cannot exceed the maximum speed that the blade can achieve, otherwise it is easy to collapse and other dangers.
Workers must do a good job of accident protection, such as wearing protective covers, gloves, hard hats, labor protection shoes, protective glasses and so on.

carbide saw blade in use in addition to these places we should pay attention to, the next need to talk about its installation requirements, because this is also a more important place. carbide saw blade in the installation to check the equipment in good condition, spindle without deformation, no diameter jump, installation fixed firmly, no vibration and so on. In addition, the staff also need to check whether its saw blade is damaged, whether the tooth type is complete, whether the saw plate is smooth and smooth, and whether there are other abnormalities to ensure safe use. If you find problems in these places, you must deal with them in time. And when assembling, you also want to make sure that the direction of the blade arrow is consistent with the direction of rotation of the spindle of the device. When the carbide saw blade is installed, it is necessary to keep the shaft, chuck and flange disc clean, and the inner diameter of the flange disc is consistent with the inner diameter of the saw blade, so that you can ensure that the flange disc and the saw blade are tightly combined, and the positioning pin is installed, and here you also need to tighten the nut. Moreover, the size of the flange of the carbide saw blade should be appropriate, and the outer diameter should not be less than 1/3 of the diameter of the saw blade. These are all places that must be paid attention to when installing.

When cutting wood materials, attention should be paid to timely chip removal, and the use of exhaust chip can be used to drain the wood chips that block the saw blade in time, and at the same time play a certain cooling effect on the saw blade.

Cutting metal materials such as aluminum carbides, copper pipes, etc., try to use cold cutting, the use of suitable cutting coolant, can effectively cool the saw blade, to ensure that the cutting surface is smooth and clean.

After the introduction of the above content, you will find that in fact, this carbide saw blade should pay attention to more places when using it, and I hope that everyone can understand it after seeing it. If necessary, please feel free to contact us. There are also customer service staff who serve you 24 hours a day.