The Saw Blade Shakes Left and Right, and the Sawing Accuracy is Difficult to Guarantee?Pay Attention to These Points

The sawing accuracy of profiles is very important to many aluminum profile processing enterprises. However, it is not easy to meet the requirements of workpiece quality. From the perspective of the entire aluminum sawing process, the running status of the aluminum cutting machine and the quality of the saw blade are undoubtedly important places to control the accuracy of the workpiece. As far as the current situation is concerned, as long as the aluminum cutting machine and saw blade come from reliable manufacturers, coupled with experienced workers, the sawing effect can often be guaranteed. But often people are not as good as heaven. When we actually use aluminum cutting machines, we will always encounter some problems. Just like the left and right shaking of the saw blade causes the sawing effect of the workpiece to be unsatisfactory. What caused the vibration of the saw blade? In fact, if you think about it carefully, it is all because of these reasons.

First of all, from the perspective of equipment, when using an aluminum cutting machine, the problem of saw blade shaking is often related to the flange. The flange is not wiped clean, and there are foreign objects on it, which will affect its firmness. Therefore, before the saw blade is installed, it must be wiped clean to avoid the left and right shaking of the saw blade. In addition, when the aluminum cutting machine is working, a large amount of aluminum swarf is accumulated on the table of the equipment outlet and is not disposed of in time, resulting in the saw blade sticking to the shavings and poor heat dissipation, thus causing the saw blade to shake.

It is also explained here that there is also copper material that can be used with aluminum alloy, because the hardness of these two materials is similar, and the size of copper material is also similar to that of aluminum material, and the speed of the equipment used is also 2800 -3000 or so. At the same time, the tooth shape of the aluminum alloy saw blade is generally a ladder flat tooth, which can be used for sawing aluminum and copper materials, and if the material and tooth shape of the aluminum alloy saw blade are slightly changed, it can also be applied to wood and plastic. processing. For specific saw blade recommendations, it is recommended to consult a professional saw blade manufacturer.